_filter

Overview

Image processing filter.

Configured the filter will be applied while in still image shooting mode. However, it is disabled during interval shooting, interval composite group shooting, multi bracket shooting or continuous shooting.

When _filter is enabled, it takes priority over the exposure program (exposureProgram). Also, when _filter is enabled, the exposure program is set to the Normal program.

The condition below will result in an error.

  • fileFormat is raw+ and _filter is Noise reduction, HDR or Handheld HDR
  • _shootingMethod is except for Normal shooting and _filter is enabled
  • Access during video capture mode

The current setting can be acquired by camera.getOptions, and it can be changed by camera.setOptions.

Support model

X Z1 V SC S
All All All All All

Support value

Value Description
off No filter
DR Comp DR compensation(RICOH THETA X is not supported)
Noise Reduction Noise reduction
hdr HDR
If you use shooting command (camera.takePicture) continuously while using HDR filter, the next shooting command cannot be used until the previous
shooting command is completed (i.e. state of Commands/Status is “done”).
Hh hdr Handheld HDR
If you use shooting command (camera.takePicture) continuously while using HDR filter, the next shooting command cannot be used until the previous
shooting command is completed (i.e. state of Commands/Status is “done”).
(RICOH THETA Z1 firmware v1.20.1 or later and RICOH THETA V firmware v3.10.1 or later. RICOH THETA X is not supported)